Bridge Service Lift

BSL 100-20
Overall Length 410“
Overall Height 103”
Overall Width 99”
Lift Capacity 7,000 lbs
Working Height 66” – 238“

The Tesco BSL 100-20 Bridge Service Lift provides access to heights beyond ordinary reach, whether it may be for overhead construction or maintenance on bridges, tunnels or highway underpasses. The combination of its 7,000-pound capacity scissor lift and dual-cylinder hydraulic system accommodates heights from up to 20 feet high. The platform allows side extensions for reach up to 3 additional feet on both sides. Its stabilizers confirm that the unit meets the 90-mph wind stability per ANSI requirement. The deployed stabilizers will inhibit the unit from drive movement.

Width 96" – 168”
Length 240”
Capacity 7,000 lbs
Reach 240”
Flooring Steel Tread Plate
Handrails 42” Steel Handrails
Safety D-Ring

Min. GVW 31,000 lb
Min. CA 156”-193”
Drive PTO Capable Transmission
Fuel Capacity 50 Gal

Drive PTO
Voltage 12VDC
Pump Gear Type
Fluid Capacity 38 Gal
Fluid Type ISO 15
Lift Cylinders 2
Stabilizers 4
Safety Dual Lift Safety Circuit
Safety Harness Attachment Rings
Pressure Relief Valve
Backup & Lowering Alarm
In-Cab Indicator Lights
Emergency Hand Pump
Maintenance Prop

Roadside & Curbside Access Stairs
Self-contained Air Compressor
Forward Platform Swing Gate
12VDC Emergency Power Pack
Auxiliary 110V Generator/Inverter System
110 VAC GFI outlet on Platform
Pintle Hooks
Wheel Chocks
Fire Extinguisher
Hydraulic Tank Heater

NOTE: Measurements are dependent on chassis selection and optional equipment.

Contact Us

Address:     3661 NW 126th Avenue
                    Coral Springs, FL 33065
Phone:        (954) 752 - 7994

TESCO EQUIPMENT LLC © 2014 All rights reserved.
DISCLAIMER: Tesco Equipment LLC manufactures equipment that meet existing ANSI/SIA 92.7 and OSHA safety standards.
Photos and Illustrations may show optional equipment. We reserve the right to make changes to the products displayed at our own discretion.